|
|
Measurement of induction machines
Sporni, Peter ; Huzlík, Rostislav (referee) ; Janda, Marcel (advisor)
This work dissert about problematics of induction engines, which are the most used types of electrical drives used in present time. At the beginning we will explain their construction and its influence to the characteristics of the engine and possibilities of their regulation. In the next part we will describe some basic types of measurments implemented on these engines. To verify the theory which was described in this work we will discuss measurments realized on concrete types of engines. At the end we will calculate the main dimensions for one of the measured engine.
|
|
|
Assessment and evaluation of safety in power. machines
Hromek, Lukáš ; Janda, Marcel (referee) ; Veselka, František (advisor)
This thesis is focused on the security and improving of electrical rotating machines service life, especially asynchronous motors. Work includes a description of the most common disorders, short description of the asynchronous motor cage casting, analysis of provided decommissioned motors with photo documentation. The last part of this thesis is focused to vibrodiagnostic of asynchronous motor with simulated imbalance and motor emplacement by laser.
|
|
|
Technology of radial bearing steel cages production
Jabůrek, Petr ; Špaček, Jindřich (referee) ; Rumíšek, Pavel (advisor)
The project conceived within engineer’s studies of branch 2303T002 is subbmitting a proposal for radial bearing cage produce technology. It is also subbmitting a design solution to functional parts for blanking the “windows” and coining the “locks”. The cage will be made from sheet steel 11 300.29. This cage should replace the current one machined from the brass Ms 58 Al. According to the literary research and development experiences of the company ZKL Brno, a.s., two pairs of tools were designed. First one for blanking the “windows” and second one for coining the “locks”. Blanking punch, blanking die and coining punch will be made from the steel 19436, coining die will be made from the steel 19312. Heat-treating process will be accomplished according to the enclosed drawings. Both pairs of tools will be mounted in the press LENR 63 AU (manufactured by the company ŠMERAL Trnava), with nominal force 630 kN.
|
|
|
Testing of Surge Arresters
Jeřábek, Lukáš ; Paar, Martin (referee) ; Krbal, Michal (advisor)
This bachelor's thesis is devoted to metal oxide surge arresters. After historical and theoretical introduction, which explains their principles and describes their characteristical properties, analysis of the standard IEC 60099-4 and testing according to the standard with focus on the type tests follows. This chapter is also amended with review of the standard's imperfections and with its most probable future development. The work concludes with a market survey, a review of the largest manufacturers and a comparison of their products.
|
|
|
An induction machine with solid rotor
Fišer, Jan ; Klíma, Jiří (referee) ; Mach, Martin (advisor)
This master’s thesis is focused on induction motor with solid rotor. The introduction is dedicated to the full analysis of the rotor. Then model of motor with solid rotor was designed in 2D and 3D. Simulations of these models were carried out using the finite elements method. Further in this thesis there are laboratory measurements` results due to the motor`s sample. Based on the results from simulations and measurements rotor modifications have been proposed, which led to improved machine parameters. 2D models have been developed by rotor modifications. These models went through finite elements method`s simulation. In the conclusion of the thesis there are all results from measurements and simulations compared.
|
|
|
Production and testing of the chain guide of the bicycle
Piruch, Martin ; Chladil, Josef (referee) ; Kalivoda, Milan (advisor)
This bachelor’s thesis deals with a designing, manufacturing and testing of chain guide for cross country mountain bike. In the first part construction types of chain guides is described. Next own design of chain guide is made. Suitable material and manufacturing method are chosen and chain guide is manufactured. Next part describes testing of the chain guide. In the end of thesis functionality, design, manufacturing method and using ability on the market are evaluated.
|
|
|
Project of service lift
Šarman, Michal ; Malach, František (referee) ; Malášek, Jiří (advisor)
The aim of this thesis is to design a service lift according to given parameters, which is actuated by a special mechanism featuring a thrust chain. The opening of the thesis presents basic categorization of lifts. Following chapters are dealing with the design of the lift itself, including selection of components and functional calculation according to ČSN EN 81-1. The final part contains technical comparison with hydraulic lifts. Relevant technical drawings are also part of the thesis.
|
|
|
Optimisation of punch tool for produce holes of bearing cage
Matail, Petr ; Jopek, Miroslav (referee) ; Peterková, Eva (advisor)
The thesis is focused on analysis of causes of blanking punch cracking, which is used for piercing holes of barrel bearing cages and designing of new construction solution by changing shape of blanking punch. Multiple variants of rounding shearing edge and chamfering shearing edge was designed. The current state and designed variants were analysed by simulation in Simufact Forming program. The variants were compared by shear force progress, equivalent stress, contact pressure in blanking punch and effective plastic strain in blank cage. According to mentioned criteria the best solutin with rounding shearing edge by 0,7 mm and chamfering face of blanking punch by 10° was chosen.
|
|
|
Production and testing of the chain guide of the bicycle
Piruch, Martin ; Chladil, Josef (referee) ; Kalivoda, Milan (advisor)
This bachelor’s thesis deals with a designing, manufacturing and testing of chain guide for cross country mountain bike. In the first part construction types of chain guides is described. Next own design of chain guide is made. Suitable material and manufacturing method are chosen and chain guide is manufactured. Next part describes testing of the chain guide. In the end of thesis functionality, design, manufacturing method and using ability on the market are evaluated.
|
|
|
An induction machine with solid rotor
Fišer, Jan ; Klíma, Jiří (referee) ; Mach, Martin (advisor)
This master’s thesis is focused on induction motor with solid rotor. The introduction is dedicated to the full analysis of the rotor. Then model of motor with solid rotor was designed in 2D and 3D. Simulations of these models were carried out using the finite elements method. Further in this thesis there are laboratory measurements` results due to the motor`s sample. Based on the results from simulations and measurements rotor modifications have been proposed, which led to improved machine parameters. 2D models have been developed by rotor modifications. These models went through finite elements method`s simulation. In the conclusion of the thesis there are all results from measurements and simulations compared.
|
guest ::
